48 Chapter 5 iCOM Controller
Liebert. PEX+Series Precision Air Conditioner User Manual
Free-cooling, HG and HW related settings
Table 5-34 Descriptions of free-cooling, HG and HW related settings
Cooling water flush duration
Stop FC at set point + or value
Freecooling flush duration
Freecooling flush starts R5
Compressor plus FC simultaneously
Electric heater operation mode
Electric Reheat Operation during Dehum
Humidification and dehumidification related settings
Table 5-35 Descriptions of humidification and dehumidification related settings
External, IFS, IFL,
PEX6, PEX9, PEX12,
21LLA, 53LLC,
53HLB, 93LLE,
93HLD, d3H, HT2,
HT5, HT9, SGH, No
Detect whether the last operation time exceeds this cycle
setting during the startup of the humidifier. Unit: hr
Prefill time. Unit: second
Humidifier on time. Unit: second
Dehumidification with compressor. When 1 or 2 is selected,
compressor 1 or 2 is used for dehumidification. When Both
is selected, the two compressors are both used for
dehumidification
Max Low Limit 1 Set point
Max Low Limit 2 Set point
Analog output related settings
Table 5-36 Descriptions of analog output related settings
Analog output selection. See Table 5-36
To Next Page
Loading...
