Emerson numatics g3 series - Page 33

G3SeriesPROFIBUS‐DPTechnicalManual
Page 32
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
Terminator Module
 Used to terminate Sub-Bus connections.
o Must be installed on the left side of the last Sub-Bus module.
Description Part Number
Terminator Module with Din Rail Mounting 240-245
Terminator Module without Din Rail Mounting 240-184
The terminator module is required to be installed in the G3 system for proper
operation
NOTE!