G3SeriesPROFIBUS‐DPTechnicalManual
Page 43
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
Valve Side Digital Output Modules
The valve side output module is used to distribute available valve side output points via a Sub-D connector (i.e.
when a Sub-D valve manifold is located away from the rest of the electronics). This module goes to the right of
the G3 valve adapter. The 16 bit output module utilizes the last 16 output bits on the valve side of the manifold
(bits 16-31)
Sixteen Outputs per Connector - Sub-D 25 Pin Female Module
Module
Part No.
I/O Type
Short Circuit
Protection
Output Points Module Size
239-1713 NPN (Sinking) Yes 16 Narrow