Emerson numatics g3 series - User Configurable Device Parameters

G3SeriesPROFIBUS‐DPTechnicalManual
Page 50
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
User Configurable Device Parameters
The Numatics’ G3 PROFIBUS-DP node allows the user to set many user options which define how the
manifold behaves in certain instances. The following are descriptions of these device parameters.
Settable Via
Parameter Name Description Display Software MCM
Address Node address
√ √ √
Brightness
Adjust brightness of graphic
display
√
X X
I/O Allocation
Coils
Allocates how many valve output
points are mapped (8, 16, 24, 32)
X
√
X
Output Idle Action
Determines whether to use idle
value attribute or hold last state
X
√
X
Output Fault
Action
Determines whether to use idle
value attribute or hold last state
X
√
X
SSA Lock
Determines how the network
address may be set
√
X X