Emerson numatics g3 series - Sub-Bus Valve Module

G3SeriesPROFIBUS‐DPTechnicalManual
Page 33
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
Sub-Bus Valve Module
 COMM - 5 pin M12 male Sub-Bus input communication connector.
o Must be connected to the Sub-Bus Out connector of the previous assembly
o Carries 24 VDC power for electronics of module
 POWER - 4 pin MINI male power connector.
o Power is required for Outputs
 Used to distribute Valves on the Sub-Bus.
o Can accept discrete I/O module to allow a Sub-Bus Valve manifold with I/O
Description Part Number
Sub-Bus Valve Module 240-241