G3SeriesPROFIBUS‐DPTechnicalManual
Page 4
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
G3 Introduction
The G3 Series is an electronic product platform that features an integrated graphic display for simple
commissioning and displaying of diagnostic information. In addition it has an innovative distribution
capability which allows the same I/O components that make up a centralized manifold configuration to be
used as the distribution components as well, decreasing the need for duplicate components on centralized and
distributed applications. The G3 platform interfaces to a variety of valve series and fieldbus interface protocols
and is capable of addressing a total of 1200 I/O points (150 bytes). With proper assembly and termination the
G3 modules will have an IP65 / IP67 rating.
The manifold can be viewed as having two sections to it, the
Valve Side
and the
Discrete I/O Side
. The
Valve
Side
supports a maximum of 32 solenoid coils and the
Discrete I/O Side
supports a maximum of 16 modules
capable of addressing up to 1200 outputs, 1200 inputs or various combinations.
Various discrete modules with integrated graphic display are available. They include digital I/O, analog I/O,
and specialty modules which cover various application needs. Pin-outs for all connectors are labeled on the
side of the respective modules and are also detailed in the module section of this document.
This manual details specific information for configuring and commissioning the Numatics G3 Series product
line. For more information relating to pneumatic valving and valve manifold assemblies, please refer to the
Numatics
In Control
Catalog at www.numatics.com.
Discrete I/O Side
Accepts up to 16 modules in
centralized or distributed configuration
Communication Module (Node)
Available with various
Industrial protocols
Sub-Bus OUT
Used to distribute
additional I/O and
manifolds
Valve Side
Drives up to 32 coils
Clips
Allows easy field changes of electronic
modules.
Graphic Display
Allows Easy Configuration
& Diagnostic reporting
ARM
(
Auto Recovery Module)
Automatically stores & reprograms
configuration information
To Next Page
Loading...
