Emerson numatics g3 series - Factory Defaults

G3SeriesPROFIBUS‐DPTechnicalManual
Page 22
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
Factory Defaults
FACTORY DEFAULT SETTINGS
Description Default
Node Address 126
SSA Lock Disabled
Brightness High
FACTORY
DEFAULTS
SET DEFAULTS
YES NO
Factory Default Settings
1. Press the SET button to enter the FACTORY DEFAULTS sub-menu.
2. Press the NEXT button to select Yes or No.
a. Selecting No will bring you back to the main FACTORY
DEFAULTS menu.
b. Selecting Yes will cause the node to reset and return all
parameters to the factory default conditions.
Press the SET button to confirm your choice.