Figure 2-9: Primary Element Selection Tab
Continuing with the example configuration:
Procedure
1. Expand the Conditioning Orifice category.
Figure 2-10: Primary Element Selection Tab - 405C/3051SFC
2. Select 405C/3051SFC.
3. Enter the Measured Meter Tube Diameter (pipe ID) at a Reference Temperature. If
the meter tube diameter cannot be measured, select a Nominal Pipe Size and Pipe
Schedule to input an estimated value for the meter tube diameter (U.S. units only).
4. If necessary, edit the Meter Tube Material.
Reference Manual Configuration
00809-0100-4803 October 2018
Emerson.com/Rosemount 21
To Next Page
Loading...
