2.4.6 Fluid properties
Note
The Fluid Properties tab is an optional step and is not required to complete a flow
configuration.
The Fluid Properties tab for the database gas air is shown in Figure 2-8. The user may view
the properties of the chosen fluid. The fluid properties are initially shown at nominal
conditions. To view density, compressibility, and viscosity of the selected fluid at other
pressure and temperature values, enter a Pressure and Temperature and select Calculate.
Note
Changing the pressure and temperature values on the Fluid Properties tab does not affect
the flow configuration.
Figure 2-8: Fluid Properties Tab
2.4.7
Primary element selection
About this task
The Primary Element Selection tab shown in Figure 2-9 allows the user to select the
primary element that will be used with the Rosemount 3051SMV. This database of primary
elements includes:
• Rosemount proprietary elements such as the Rosemount Annubar
™
and the
conditioning orifice plate
• Standardized primary elements such as ASME, ISO, and AGA primary elements
• Other proprietary primary elements
Configuration Reference Manual
October 2018 00809-0100-4803
20 Rosemount 3051S Multivariable Transmitter
To Next Page
Loading...
