Reference Manual
00809-0100-4840, Rev. BA
July 2008
Rosemount 3100 Series
B-2
EU CONFORMITY NOTE:
To identify the approvals for your Rosemount 3100 Series transmitter, refer to
the labelling on the housing, and see “Ordering Information” on page A-6.
The EC declaration of conformity for all applicable European directives for this
product can be found on page B-12 and the Rosemount web site at
www.rosemount.com. A hard copy may be obtained by contacting our local
sales representative.
ATEX Directive (94/9/EC)
Complies with the ATEX Directive.
Pressure Equipment Directive (PED) (97/23/EC)
3100 Series is outside the scope of PED Directive.
Electro Magnetic Compatibility (EMC) Directive
EN61326 (Class B)
CE-mark
Complies with applicable directives
3101 (EMC), 3102 (EMC), and 3105 (EMC, ATEX)
NON-HAZARDOUS
LOCATION
CERTIFICATIONS
NOTE:
To identify the approvals for your Rosemount 3100 Series transmitter, refer to
the labelling on the housing, and see “Ordering Information” on page A-6.
Factory Mutual (FM)
Ordinary Location
Certification
The 3101 and The 3102:
Project ID: 3024095
G5 The transmitter has been examined and tested to determine that the
design meets basic electrical, mechanical, and fire protection
requirements by FM, a nationally recognized testing laboratory (NRTL)
as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
Canadian Standards
Association (CSA)
Ordinary Location
Certification
The 3101 and The 3102:
Project ID: 1878089
G6 The transmitter has been examined and tested to determine that the
design meets basic electrical, mechanical, and fire protection
requirements by CSA, a nationally recognized testing laboratory as
accredited by the Standards Council of Canada (SCC).
Special conditions for safe use:
1. For the CSA approval, power for the Rosemount 3100 Series must be
supplied from a Rosemount 3490 Control Unit, or a class 2 or SELV source.
To Next Page
Loading...
