111
Reference Manual
00809-0100-4021, Rev GC
Section 3: HART commissioning
April 2014
HART® commissioning
To review the configuration of the thermocouple diagnostic: Fast Keys
2-2-4
1. From the Home screen, 3 Service Tools.
2. Select 4 Maintenance.
3. Select 1 T/C Diag Snsr 1 or 2 T/C Diag Snsr 2 depending on which sensor you are
interested in.
4. Select 3 TC Diag Config to view the configuration information of your sensor.
5. To Reset Baseline Value: If you wish to reset the baseline value of your sensor, select 4
Reset Baseline and press OK.
To Next Page
Loading...
