46
Reference Manual
00809-0100-4021, Rev GC
Section 3: HART commissioning
April 2014
HART® commissioning
Configure Hot Backup in guided setup
Enable Hot Backup in guided setup: Fast Keys 2-1-5
1. From the Home Screen, choose 2 Configure.
2. Choose 1 Guided Setup.
3. Choose 5 Config Hot Backup.
4. When prompted, choose 1 Yes to enable Hot Backup. To exit, select 2 No.
5. When prompted, choose which variable you would like as your primary variable (PV)
and press ENTER. With Hot Backup enabled, the PV must either be First Good
Temperature or Average Temperature.
To Next Page
Loading...
