3.4 Mounting the Alarm Panel
Selecting a suitable location:
• Mount the alarm panel close to the door which you normally use to enter/exit
your house.
• Note that the Alarm panel requires a power outlet to function properly.
• Ensure the location selected has a good GSM signal. You can do this by
cross checking the signal bar on your phone at that location.
• The panel must not be co-located or operated in conjunction with any other
nearby transmitting devices or antenna.
1. Remove the back panel mounting bracket of the alarm and mount the bracket
on the wall using wall anchors and screws.
2. Once secured, ensure the power connectivity, and install the alarm panel to the
secured mounting bracket.
3. Power on the panel and test to make sure the alarm system has a good signal.
To Next Page
Loading...
