7.0 Apple and Android APP
The EM8710 system can be controlled and configured by using the “EM8710” APP.
Search for the EM8710 APP in the Apple App-store or in the Google Play Store.
Download and install the APP on your phone/tablet.
Notice: The alarm system can be used and configured by text messages, even if
used with Android or Apple App! For the use of text messages, you will be charged
by your telecom provider. Inform with your telecom provider the estimated cost rates
for sending text messages.
7.1 Setting up the GSM Host number (Full control)
1. Enter the PIN (default 1234) of the control panel.
2. Followed by “66”
3. Now enter the Host phone number that will have full control of the alarm
system.
4. And confirm with the key
5. The LED will flash to confirm the host number is set
Example 1234 + 66 + 0049 + 612345678 +
With this configuration the Host phone number is also configured as the first Phone
number to be configured for receiving alarm notifications via SMS text message and
dialing, further the number is configured as first Speed dial number (Long Press “1” to
use Speed dial 1).
To Next Page
Loading...
