5.0 Deleting accessories/sensors
5.1 Deleting all sensors
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 1 +
5.2 Delete a sensor from zone 1-9
First define the sensor zone number you wish to delete.
To define the zone number of the sensor, follow the following steps: Arm the alarm
panel, trigger the sensor you wish to delete, the sensors zone number will now be
illuminated on the touch panel of the alarm 1-9 (0 are all sensor zones above 9) in this
example the sensor zone is 2.
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 1 + 2 + (the 2 should be replaced with the zone number
assigned to the sensor you wish to delete).
5.3 Deleting all sensors after zone 9
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 1 + 0 +
5.4 Deleting all remotes
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 2 +
5.5 Delete a remote from 1-9
First define the remote number you wish to delete. In this example we want to delete
remote 2.
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 2 + 2 + (the 2 should be replaced with the remote number
assigned to the remote you wish to delete).
5.6 Deleting all remotes after 9
1. On the alarm panel, enter the PIN + key to disarm the system.
2. Enter PIN + 20 + 2 + 0 +
To Next Page
