Eminent EM8710 - SMS Commands

35 | ENGLISH
50 tags)
Delete RFID
Tags
Enter PIN code + 20 + 3 +
Delete all RFID tags
Enter PIN code + 20 + 3 + 1-9
+
Delete RFID tag 1-9 where 1 is the RFID tag
number you wish to delete
Enter PIN code + 20 + 3 + 0 +
Delete all RFID tags after 10
Add indoor
siren
Enter PIN code +
1. Put the siren in binding mode.
2. Enter PIN code + DISARM key.
If the siren failed to bind, repeat step 1 and 2
above.
Add/Change
Host
Number
Enter PIN code + 66 + Enter
PIN code + 20 + 4 + +
Owner’s mobile Number +
Enter PIN code + 20 + 4 +
The host number will receive a success
confirmation SMS. This number will also be
added into the list of Alarm Voice call number,
Alarm SMS Phone number and Speed Dial
No.
13.2 SMS commands
Setup
SMS sent to panel
SMS in Return
Get
Alarm Voice call Phone
Numbers
5
TEL:
1.
2.
3.
4.
5.
Set
Alarm Voice call Phone
Numbers
Use result from “Get
Alarm Voice call Phone Numbers”
Edit->Send back
Set Phone Number Successfully
Get
Alarm SMS Phone
Number
6
SMS:
1.
2.
3.
4.
5.
Set
Alarm SMS Phone
Number
Use result from “Get
Alarm SMS Phone Number” Edit-
>Send back
Set Phone Number Successfully
Get
Speed Dial No.
8
SPEEDDIAL:
1.
2.
3.
4.
5.
Set
Speed Dial No. (5 sets)
Use result from “Get
Speed Dial No.” Edit->Send back
Set Phone Number Successfully
Get Operation Menu 1
#
0 Disarm
1 Arm
2 Partial Arm
3 Two-way Talk
4 Listen In
00 System Status
? Phone Number Setup
Get Operation Menu 2
?
5 Alarm Call Phone Number Set
6 Alarm SMS Phone Number
Set 8 Speed Dial Phone Number