Eminent EM8710 - Page 36

36 | ENGLISH
Set
?? System Setup
Get Operation Menu 3
??
91-99 Change Zone Name 10
Change RFID Tag Name 11
Enter & Exit Delay Time 12
Siren Volume
13 Siren Ring Time
Get Device version
information (can only be
requested by the host
phone number)
???
Disarm
0
System Disarmed
Arm
1
System Armed
Partial
2
System Partial Armed
Two Way Talk
3
Call back from alarm panel
(Two way communication
enabled)
Listen In
4
Call back from alarm panel (the
Speaker on the alarm panel is
muted)
Request System Status
00
System Disarmed/ System
Armed/ System Partial Armed
Entry & Exit Delay Time: xx
Seconds Siren Volume:
Mute/Low/High
Siren Ringing Time: xx Minutes
Get Zone 1 Name
91
Zone1 Name: Zone1
Change Zone 1 Name
Use result from “Get Zone 1
Name” Edit->Send back
Set Zone Name Successfully
Get Zone 2 Name
92
Zone2 Name: Zone2
Change Zone 2 Name
Use result from “Get Zone 2
Name” Edit->Send back
Set Zone Name Successfully
Get RFID Tag Names
10
Tag Names: 1.
2.
3.
4.
Change RFID Tag
Names
Use result from “Get
RFID Tag Names” Edit->Send
back
Set Tag Names Successfully
Get Entry Delay & Exit
Delay Time
11
Entry & Exit Delay Time(0-240
sec.): 15
Set Entry Delay & Exit
Delay Time
Use result from “Get
Entry Delay & Exit Delay Time”
Edit->Send back
Set Delay Time Successfully
Get Siren Volume
12
Siren Volume (0 Mute, 1 Low,
2 High): 2
Set Siren Volume
Use result from “Get
Siren Volume” Edit->Send back
Set Siren Volume Successfully
Get Siren Alarm
Duration
13
Siren ringing time (1-9
minutes): 3
Set Siren Alarm
Duration
Use result from “Get
Siren Alarm Duration” Edit->Send
back
Set Siren Time Successfully
Note 1: Maximum length for telephone numbers is 20 digits. Only numbers 0 – 9 and
“,” can be used. For example, phone number 0222606868 with extensions 1234