3.2 Download APP
The EM8710 system can be set and operated with an APP, but it can also be fully
used with text messages.
The APP is only available for Android and Apple (iOS) devices.
Search for the "EM8710" APP in the Google Play store or the Apple Store.
See chapter "Apple and Android APP" for more information on the operation of the
APP
3.3 Setting up the host phone number
First, you need to enter the Host Phone Number so that the GSM notification can
function normally. The host phone number refers to the owner’s phone number that
needs to be entered the alarm panel, so that it will recognize SMS commands sent
from the owner’s phone.
Note: The “Show Caller ID” function on the owner’s mobile phone must be turned on.
The alarm panel can only then determine if this number is authorized to use SMS
commands.
1. Begin configuration by entering the default configuration PIN code ‘1234’
2. On the touch keypad, enter 66 + Key + Owner’s number + key
Note: Do not enter the phone number assigned to the SIM card inside the alarm
panel.
3. You will receive an SMS message saying phone number set successfully.
4. Your alarm panel can now be controlled from the smartphone app.
To Next Page
Loading...
