Eminent EM8710 - Page 34

34 | ENGLISH
Alarm
Message
Enter PIN code +
seconds). Playback will start automatically
after the recording is completed
2. Press to stop recording when the message
is shorter than 10 seconds
Recording: The REC key LED is flashing
Playback: The REC key LED is on
Alarm Type
1 (Siren and
GSM are
both
enabled)
Enter PIN code + 01 +
Siren is enabled (default)
Alarm Type
2 (GSM is
enabled the
siren is
disabled)
Enter PIN code + 02 +
Siren is disabled you can only be notified by
SMS or phone call in an alarm event
Test Mode
Enter PIN code + 03 +
Test Mode: Disarm key flashes
A tone will sound when a accessory signal is
received
Hold key “7” for 3 or more seconds: Test GSM
receiving signal strength
Hold key “8” for 3 or more seconds: Turn on /
off the Wireless Siren
Hold key “9” for 3 or more seconds: Test
telephone SMS
Press Disarm key to exit Test Mode
Home group
Enter PIN code + 15 + 0 +
Security Mode 0
Sensor activated only when the alarm is
triggered in the ARM status. Sensor will not be
activated in Home mode.
Normal
group
Enter PIN code + 15 + 1 +
Security Mode 1
Sensor is activated in both ARM and Home
mode.
Home group
+ delay
Enter PIN code + 15 + 2 +
Security Mode 2
Same as Security mode 0 with additionally a
delay.
Normal
group +
delay
Enter PIN code + 15 + 3 +
Security Mode 3
Same as Security mode 1 with additionally a
delay.
24H Group
Enter PIN code + 15 + 4 +
Security Mode 4
Sensor activated when Disarmed / Home
mode / Armed and will cause an immediate
alarm.
Delete
sensor
Enter PIN code + 20 + 1 +
Delete all sensor zones
Enter PIN code + 20 + 1 + 1 +
Delete sensor zone 1-9 where 1 is the sensor
number you wish to delete
Enter PIN code + 20 + 1 + 0 +
Delete all sensor zones after 10
Add Remote
(up to 10
remotes)
Enter PIN code + 15 +
Add remote
Delete
Remote
Enter PIN code + 20 + 2 +
Delete all remote
Enter PIN code + 20 + 2 + 1 +
Delete remote 1-0 where 1 is the remote
number you wish to delete
Add RFID
Tags (up to
Enter PIN code + 15 +
Add RFID tag