Endress+Hauser Cerabar M - Page 64

Operation Cerabar M, Deltabar M, Deltapilot M
64 Endress+Hauser
Discrete Input Block settings
Alarm conditions Transducer Block Parameter name Parameter CHANNEL,
Discrete Input Block
General device error
Diagnostic TRD
Diagnostic code/
ACTUAL_HIGHEST_
ALARM
10
Configuration error 11
Sensor overpressure 12
Sensor underpressure 13
Temperature measured value
overrange (Cerabar and Deltapilot)
14
Pressure measured value overrange 15