Description of device parameters Ceraphant PTP31B, PTP33B
62 Endress+Hauser
DVA Measured value display
Navigation EF → DIS → DVA
Description Configuration of the measured value display and display of the configured switch point.
Selection • PV = display measured value
• PV,/' = display measured value as a percent (only for devices with a current output)
– 0% is equivalent to LRV
– 100% is equivalent to URV
• SP = display set switch point
Factory setting PV
DRO Display measured value rotated by 180°
Navigation EF → DIS → DRO
Description Use this function to rotate the measured value display by 180°.
Selection • NO
• YES
DOF Switch display on or off
Navigation EF → DIS → DOF
Description Use this function to switch the display on or off.
When the user exits the menu, a 30 second delay elapses until the display (including the
back-lighting) switches off.
Selection • NO
• YES
LCK unlocking code
Navigation EF → ADM → LCK
To Next Page
Loading...
