Endress+Hauser Deltabar S PMD75 - Page 200

Parameter description (Local operation and FieldCare) Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
200 Endress+Hauser
P01-xMx7xxxx-19-xx-xx-en-016
Fig. 57: PROCESSINFO group
for the PROCESS VALUES function group "Pressure" measuring mode, → ä 200, Table 27: OPERATING
MENU → PROCESSINFO → PROCESS VALUES "Pressure"
for the PROCESS VALUES function group "Level" measuring mode, → ä 201, Table 28: OPERATING MENU
→ PROCESSINFO → PROCESS VALUES "Level"
for the PROCESS VALUES function group "Flow" measuring mode, → ä 202, Table 29: OPERATING MENU
→ PROCESSINFO → PROCESS VALUES "Flow"
for the FUNCTION Blocks function group, → ä 202, Table 30: OPERATING MENU → PROCESSINFO →
Function Blocks
for the PEAKHOLD function group, → ä 203, Table 31: OPERATING MENU → PROCESSINFO → PEAK
HOLD INDICATOR
AI 2OUT Value
AI 3OUT Value
AI 1OUT Value
FUNCTION BLOCKS
AI 5OUT Value
AI 6OUT Value
AI4OUT Value
FlowPressure Level
MEAS. VAL.TREND
SENSOR PRESSURE
SENSOR TEMP.
TOTALIZER 1
TOTAL. 1 OVERFLOW
TOTALIZER 2
TOTALIZER 2
TOTAL. 2 OVERFLOW
PCB MAX. TEMP.
PCB MIN.TEMP.
RESET PEAKHOLD
MAX. MEAS.TEMP.
MIN. MEAS.TEMP.
PCB COUNT:T>Tmax
PCB CONUTT<Tmin
COUNTER T<Tmin
COUNTER T>Tmax
COUNT
ER P < Pmin
MAX. MEAS. PRESS.
MIN. MEAS. PRESS
COUNTER P > Pmax
MEASURED VALUE
MEAS. VAL.TREND
LEVL BEFORE LIN
TANK CONTENT
SENSOR PRSSURE
SENSOR TEMP.
PRESSURE
CORECTED PRESS.
MEASRED VALUE
PRESSURE
CORRECTED PRESS.
MEASURED VALUE
SENSOR DATAPROCESS VALUE
MEASURED VALUE
QUICK SETUP
PROCESS INFOSETTINGS
OPERATING MENU
MEAS. VAL.TREND
SENSOR PRSSURE
SENSOR TEMP.
PRESSURE
CORECTED PRESS.
Table 27: OPERATING MENU → PROCESSINFO → PROCESS VALUES "Pressure"
Parameter name Description
Prerequisite:
• MEASURING MODE = Pressure
MEASURED VALUE (679)
Display
Displays the measured value
In the "Pressure" measuring mode, this value corresponds to the PRESSURE parameter.