Endress+Hauser Gammapilot M FMG60 - Potential equalization

Gammapilot M FMG60 PROFIBUS PA Wiring
Endress+Hauser 25
2
1
A0018089
1 Gammapilot M FMG60
2 Cable of the display and operating unit FHX40
For some Dust-Ex versions of the Gammapilot M, the FHX40 connector is protected by a metal
sleeve:
A0018090
1. Loosen the sleeve with an Allen key and remove it
2. Connect the display and operating unit FHX40
3. Attach the sleeve and fasten the Allen screw
4.10 Wiring for cascade mode
See the Operating Instructions
BA00329F/00/EN