Endress+Hauser Gammapilot M FMG60 - Radiation Protection

Basic safety instructions Gammapilot M FMG60 PROFIBUS PA
8 Endress+Hauser
connection values and safety instructions listed in this supplementary documentation must be
observed.
• Technical personnel must be suitably qualified and trained.
• Comply with the metrological and safety-related requirements for the measuring point.
L
WARNING
‣
The three screws connecting the detector pipe to the terminal housing may not be opened.
A0018068
L
WARNING
‣
The safety instructions, which depend on the certificate ordered, must be observed
(Operating Instructions -> "Certificates and approvals" section)
2.5 Radiation protection
L
WARNING
‣
When working with radioactive sources, avoid any unnecessary exposure to radiation. All
unavoidable radiation exposure must be kept to a minimum. Three basic concepts apply to
achieve this:
A
B
C
A0016373
A Shielding
B Time
C Distance