Endress+Hauser Gammapilot M FMG60 - Radiation protection

Gammapilot M FMG60 PROFIBUS PA About this document
Endress+Hauser 5
1 About this document
1.1 Symbols used
1.1.1 Safety symbols
Symbol Meaning
DANGER
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
WARNING
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
CAUTION
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
NOTICE
NOTICE!
This symbol contains information on procedures and other facts which do not result
in personal injury.
1.1.2 Electrical symbols
Symbol Meaning
Direct current
A terminal at which DC is present or through which DC flows.
Alternating current
A terminal to which alternating voltage (sine-wave) is applied or through which alternating current
flows.
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
1.1.3 Tool symbols
Symbol Meaning
Flat blade screwdriver
Allen key