Temperature head transmitter 6 Commissioning
Endress+Hauser 43
Commuwin II operating matrix
Fig. 6-3: Commuwin II operating matrix:
A = Unit functions only active on customer specific linearisation
B = Unit functions only active on TC connection
C = Unit functions only active on RTD 2 wire connection.
2
Hint!
If there are any communication faults in the Microsoft® Windows NT® Version 4.0
operating system please follows these instructions:
Switch of the ’FIFO active’ setting.
In order to do this proceed as follows:
• Using the menu 'START' → 'SETTINGS' → 'SYSTEM CONTROL' → 'CONNECTIONS'
select the menu point 'COM-Port'. Switch off the ’FIFO active’ command off using the
menu path 'SETTINGS’
→ ’EXPANDED'.
To Next Page
Loading...
