Endress+Hauser Liquistation CSF34 - Logbooks Menu

Diagnostics and troubleshooting Liquistation CSF34
160 Endress+Hauser
Logbook Visible in Max.
entries
Can be
disabled
1
)
Logbook
can be
deleted
Entries
can be
deleted
Can be
exported
Data logbook for
sensors (optional)
Data logbooks 150 000 Yes Yes Yes Yes
Debugging logbook Debug events
(only accessible by
entering the special
service activation code)
1000 Yes No Yes Yes
1) Data in brackets means this depends on the overall logbook
11.9.2 Logbooks menu
DIAG/Logbooks
Function Options Info
All events Chronological list of all the logbook entries, with
information on the type of event
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Calibration events Chronological list of the calibration events
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Delete all entries Action You can delete all the calibration logbook entries
here.
Configuration events Chronological list of the configuration events
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Delete all entries Action You can use this to delete all the operation
logbook entries.
Diagnostic events Chronological list of the diagnostics events
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Delete all entries Action You can use this to delete all the diagnostics
logbook entries.
You can also view your data logbook entries graphically on the display (Show plot).