Endress+Hauser Liquistation CSF34 - Page 161

Liquistation CSF34 Diagnostics and troubleshooting
Endress+Hauser 161
You can also adapt the display to suit your individual requirements:
• Press the navigator button in the graphic display: you are given additional options such
as the zoom function and x/y movement of the graph.
• Define the cursor: if you select this option, you can move along the graph with the
navigator and view the logbook entry (data stamp/measured value) in text form for
every point in the graph.
• Simultaneous display of two logbooks: Select 2nd plot and Show plot
• A small cross marks the currently selected graph for which the zoom can be changed
or a cursor used, for example.
• In the context menu (press the navigator button), you can select the other graph. You
can then apply the zoom function, a movement or a cursor to this graph.
• Using the context menu, you can also select both graphs simultaneously. This enables
you to use the zoom function on both graphs simultaneously, for example.
126.00
nA
34.00
nA
09.11.2011
14:02:20
23.11.2011
11:25:32
126.00
nA
34.00
nA
09.11.2011
14:02:20
23.11.2011
11:25:32
6.00
pH
09.11.2011
14:02:20
23.11.2011
11:25:32
09.11.2011
14:02:20
23.11.2011
11:25:32
12.00
pH
A0016688
 73 Simultaneous display of two graphs, the top one is selected
DIAG/Logbooks
Function Options Info
Data logbooks Chronological list of the data logbook entries for
sensors
Data logbook 1 ... 8
<Logbook name>
This submenu is available for each data logbook
that you have set up and activated.
Source of data Read only Input or mathematical function is displayed
Measured value Read only Measured value being recorded is displayed
Log time left Read only Display of days, hours and minutes until logbook
is full.
‣
Pay attention to the information on
selecting the memory type in the menu
General settings/Logbooks.
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Show plot Graphic display of the
logbook entries
The display is according to your settings in the
menu General settings/Logbooks.
Select 2nd plot Select another data
logbook
You can view a second logbook at the same time
as the current one.