Endress+Hauser Micropilot FMR56 - Page 60

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
60 Endress+Hauser
Maximum value (2315)
Navigation Expert → Sensor → Linearization → Maximum value
Write access Maintenance
Prerequisites Only visible if one of the following linearization types has been selected:
• Linear
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
Description Definition of the maximum content of the vessel (100%), as measured in the Unit
linearized.
Input range -50000 ... +50000
Factory setting 100
Diameter (2342)
Navigation Expert → Sensor → Linearization → Diameter
Write access Maintenance
Prerequisites Only visible if one of the following linearization types has been selected:
• Horizontal cylinder
• Sphere
Description Definition of the tank diameter
Input range 0 ... 9999.999 m (32808 ft)
Factory setting 2 m (6.6 ft)
Additional information The value must be specified in the selected distance unit (→  38).
Intermediate height (2310)
Navigation Expert → Sensor → Linearization → Intermediate height
Write access Maintenance