Endress+Hauser Proline Promag 53H Technical Information

Products Solutions Services
TI00048D/06/EN/14.16
71318126
Technical Information
Proline Promag 50H, 53H
Electromagnetic flowmeter
The flowmeter for smallest flow rates with a modular electronic concept and/
or with flexible system integration
Application
• The measuring principle is virtually independent of pressure,
density, temperature and viscosity
• For the smallest flow quantities and demanding hygienic
applications
Device properties
• Liner made of PFA
• Sensor housing made of stainless steel (3-A, EHEDG)
• Wetted materials CIP, SIP cleanable
• Device in compact or remote version
Promag 53
• 4-line backlit display with touch control
• HART, PROFIBUS PA/DP, Modbus RS485, FF, EtherNet/IP
Your benefits
• Flexible installation concept – numerous hygienic process
connections
• Energy-saving flow measurement – no pressure loss due to
cross-section constriction
• Maintenance-free – no moving parts
Promag 53
• Quality – software for filling & dosing, density, electrode
cleaning and also advanced diagnostics
• Easy calculation – bidirectional totalizers
• Automatic recovery of data for servicing

Endress+Hauser Proline Promag 53H Specifications

General

Device Type	Electromagnetic Flowmeter
Measuring Principle	Faraday's law of electromagnetic induction
Housing Material	Aluminum, stainless steel
Nominal Diameter	DN 15 to DN 600
Process Temperature	-40 to +150 °C
Process Pressure	Up to 40 bar (depending on nominal diameter)
Output Signal	4 to 20 mA HART, pulse/frequency/switch output
Digital Communication	HART, PROFIBUS PA, FOUNDATION Fieldbus
Power Supply	24 V DC
Material	Stainless steel
Lining Material	PTFE
Electrode Material	316L, Hastelloy
Degree of Protection	IP67
Accuracy	±0.2% of measured value ±1 mm/s