Endress+Hauser Proline Promag 53H - Page 39

Proline Promag 50H, 53H
Endress+Hauser 39
Flange according to JIS B2220:
20K
1.4404 (316L)
Sensor DN Fits to
flange
di G L LK M H × B
5*H**-F*********** [mm] B2220 [mm] [mm] [mm] [mm] [mm] [mm]
A0005551
2 to 8 ND 15 15 95 67 70 15 62 × 42
15 ND 15 16 95 67 70 15 62 × 42
25 (DIN) ND 25 26 125 67 90 19 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
 1.6 m
Lap joint flange according to
EN 1092-1 (DIN 2501): PN 16
PVDF
Sensor DN Fits to
flange
di G L LK M H × B
5*H**-G*********** [mm] EN 1092-1
(DIN 2501)
[mm] [mm] [mm] [mm] [mm] [mm]
A0005567
2 to 8 DN 15 16 95 57 65 14 62 × 42
15 DN 15 16 95 57 65 14 62 × 42
25 (DIN) DN 25 27.2 115 57 85 14 72 × 55
• Fitting length = (2 × L) + 86 mm
• Fitting length to DVGW (200 mm)
• Surface roughness: R
a
 1.6 m
• The requisite ground rings can be ordered as accessories
(Order No. DK5HR-****).
Lap joint flange according to
ASME B16.5: Class 150
PVDF
Sensor DN Fits to
flange
di G L LK M H × B
5*H**-H*********** [mm] ASME
B16.5
[mm] [mm] [mm] [mm] [mm] [mm]
A0005567
2 to 8 ½" 169557601662 × 42
15 ½" 16 95 57 60 16 62 × 42
25 (DIN) 1" 27.2 115 57 79 16 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
 1.6 m
• The requisite ground rings can be ordered as accessories
(Order No. DK5HR-****).
G
di
LK
H × B
L
M
G
di
LK
L
H × B
M
G
di
LK
L
H × B
M