Endress+Hauser Proline Promag 55 - Description of the modules

Device functions Proline Promag 55 FOUNDATION Fieldbus 3 Transducer Block
Endress+Hauser 107
Info Line Mux -
Display Mode
AUTO - OOS
! Note!
The option is not active unless one of the following was selected in the
parameter "Info Line Mux - Assign" ( → Page 105):
• MASS FLOW BARGRAPH IN %
• VOLUME FLOW BARGRAPH IN %
Use this parameter to define the format of the bar graph.
Options:
STANDARD (Simple bar graph with 25 / 50 / 75% gradations and
integrated sign).
A0001258
SYMMETRY (Symmetrical bar graph for positive and negative directions of
flow, with –50 / 0 / +50% gradations and integrated sign).
A0001258
Factory setting:
STANDARD
"Display" Transducer Block/base index 1800:
Parameter
Write access with
operating mode
(MODE_BLK)
Description