Endress+Hauser Proline Promag 55 - Group ADDITIONAL LINE; Function Group CONFIGURATION

Device Functions Proline Promag 55 FOUNDATION Fieldbus 5 Block USER INTERFACE
Endress+Hauser 27
5.3 Group ADDITIONAL LINE
5.3.1 Function group CONFIGURATION
USER INTERFACE C ⇒ CONTROL CAA
⇓
MAIN LINE CCA
⇓
ADDITIONAL LINE CEA ⇒ CONFIGURATION 240
Function description
USER INTERFACE → ADDITIONAL LINE → CONFIGURATION
A0001253
1= main line, 2 = additional line, 3 = information line
ASSIGN
(2400)
In this function, a value to be displayed is assigned to the additional line (middle line in
the local display). This value is displayed during normal operation.
Options:
OFF
VOLUME FLOW
MASS FLOW
VOLUME FLOW IN %
MASS FLOW IN %
VOLUME FLOW BARGRAPH IN %
MASS FLOW BARGRAPH IN %
FLOW VELOCITY
TOTALIZER (1 to 3)
AI1 - OUT VALUE
AI2 - OUT VALUE
AI3 - OUT VALUE
AI4 - OUT VALUE
AI5 - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG (tag name)
Factory setting:
TOTALIZER 1
Esc
E
+
-
1
2
3