Endress+Hauser Proline Promag 55 - Group CONTROL; Function Group BASIC CONFIGURATION

5 Block USER INTERFACE Device Functions Proline Promag 55 FOUNDATION Fieldbus
20 Endress+Hauser
5.1 Group CONTROL
5.1.1 Function group BASIC CONFIGURATION
USER INTERFACE C ⇒ CONTROL CAA ⇒ BASIC CONFIGURATION 200
Function description
USER INTERFACE → CONTROL → BASIC CONFIGURATION
LANGUAGE
(2000)
Use this function to select the language for all texts, parameters and messages shown on
the local display.
! Note!
The displayed options depend on the available language group shown in the LANGUAGE
GROUP (8226) function.
OPTIONS:
Language group WEST EU / USA:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
PORTUGUESE
Language group EAST EU / SCAND:
ENGLISH
NORSK
SVENSKA
SUOMI
POLISH
RUSSIAN
CZECH
Language group ASIA:
ENGLISH
BAHASA INDONESIA
JAPANESE (syllabary)
Language group CHINA:
ENGLISH
CHINESE
Factory setting:
Country dependent → Page 123
! Note!
• If you press the X key combination at startup, the language defaults to ENGLISH.
• You can change the language group via the configuration program ToF Tool - Fieldtool
Package. Please do not hesitate to contact your Endress+Hauser sales office if you have
any questions.
DISPLAY DAMPING
(2002)
Use this function to enter a time constant defining how the display reacts to severely
fluctuating flow variables, either very quickly (enter a low time constant) or with
damping (enter a high time constant).
User input:
0 to 100 seconds
Factory setting:
1 s
! Note!
Setting the time constant to zero seconds switches off damping.