Endress+Hauser Proline Promag 55 - Function Group INFORMATION

Device Functions Proline Promag 55 FOUNDATION Fieldbus 7 Block BASIC FUNCTION
Endress+Hauser 43
7.1.3 Function group INFORMATION
BASIC FUNCTION G ⇒ FOUNDATION FIELDBUS GGA ⇒ CONFIGURATION 620
⇓
FUNCTION BLOCKS 6122
⇓
INFORMATION 624
Function description
BASIC FUNCTION
→ FOUNDATION FIELDBUS → INFORMATION
MANUFACTURER ID
(6240)
Use this function to view the manufacturer ID in decimal numerical format.
User interface:
452B48 (hex) for Endress+Hauser
DEVICE TYPE
(6241)
Use this function to view the device ID in hexadecimal numerical format.
User interface:
1042 (hex) for Promag 55 FOUNDATION Fieldbus
SERIAL NUMBER
(6242)
Use this function to view the serial number.
User interface:
11-digit number
DEVICE REVISION
(6243)
Use this function to view the device revision number.
! Note!
The information displayed here can be used to ensure that the correct system files
(DD = Device Description) are used for integration into the host system. The system files
can be downloaded free of charge from the Internet at www.endress.com.
Example:
Information displayed in the DEVICE REVISION function (6243)
→ 03
Information displayed in the DD REVISION function (6244)
→ 01
required device description files (DD)
→ 0301.sym / 0301.ffo
DD REVISION
(6244)
Use this function to view the revision number of the device description.
! Note!
The information displayed here can be used to ensure that the correct system files
(DD = Device Description) are used for integration into the host system. The system files
can be downloaded free of charge from the Internet at www.endress.com.
Example:
Information displayed in the DEVICE REVISION function (6243)
→ 03
Information displayed in the DD REVISION function (6244)
→ 01
required device description files (DD)
→ 0301.sym / 0301.ffo