Device Functions Proline Promag 55 FOUNDATION Fieldbus 6 Block TOTALIZER
Endress+Hauser 37
TOTALIZER MODE
(3002)
Use this function to define how the flow components are to be totalized.
Options:
BALANCE
Positive and negative flow components. The positive and negative flow components are
balanced. In other words, net flow in the flow direction is registered.
FORWARD
Positive flow components only
REVERSE
Negative flow components only
Factory setting:
Totalizer 1 = BALANCE
Totalizer 2 = FORWARD
Totalizer 3 = REVERSE
RESET TOTALIZER
(3003)
Use this function to reset the sum and the overflow of the totalizer to zero.
Options:
NO
YES
Factory setting:
NO
Function description
TOTALIZER → TOTALIZER (1 to 3) → CONFIGURATION
To Next Page
Loading...
