Endress+Hauser Proline Promag W 400 - Page 39

Proline Promag W 400
Endress+Hauser 39
DN
1)
A B C D E F G H J K
2)
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
250 199 119 80 167 382 205 587 400 166 450
300 199 119 80 167 407 230 637 460 166 500
1) EN (DIN), AS, JIS; For flanges according to AS, only nominal diameters DN 80, 100 and 150 to 300 are
available.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Dimensions in US units
DN
1)
A B C D E F G H J K
2)
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
1 7.83 4.69 3.15 6.57 10.5 3.31 13.8 4.72 3.70 7.87
1 ½ 7.83 4.69 3.15 6.57 10.5 3.31 13.8 4.72 3.70 7.87
2 7.83 4.69 3.15 6.57 10.5 3.31 13.8 4.72 3.70 7.87
3 7.83 4.69 3.15 6.57 11.5 4.29 15.8 7.09 3.70 7.87
4 7.83 4.69 3.15 6.57 11.5 4.29 15.8 7.09 3.70 9.84
6 7.83 4.69 3.15 6.57 13.1 5.91 19.0 10.2 5.51 11.8
8 7.83 4.69 3.15 6.57 14.0 7.09 21.1 12.8 6.14 13.8
10 7.83 4.69 3.15 6.57 15.0 8.07 23.1 15.8 6.14 17.7
12 7.83 4.69 3.15 6.57 16.0 9.06 25.1 18.1 6.54 19.7
1) ASME
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Order code for "Calibration flow", options H and K, or order code for "Sensor option", option CA
"Corrosion protection" (IP66/67, Type 4X, fully welded; corrosion protection EN ISO 12944 C5-M) with
DN 25 to 300 (1 to 12"); order code for "Housing", option M "Compact, polycarbonate" or option A
"Compact, coated aluminum"
E
F
G
H
A
B
C
D
A0021328
Dimensions in SI units
DN A B C D F G
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
25 193 103 90 167 200 188
32 193 103 90 167 200 188
40 193 103 90 167 200 188