Endress+Hauser Proline Promag W 400 - Hardware Settings

Proline Promag W 400
46 Endress+Hauser
DN
1)
A B C D E F G H J K
2)
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
1800 193 103 90 167 1338 1188 2526 1632 2376 2340
2000 193 103 90 167 1388 1238 2626 1732 2476 2600
1) EN (DIN), AS; For flanges according to AS, only nominal diameters DN 350, 400, 500 and 600 are
available.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Dimensions in US units
DN
1)
A B C D E F G H J K
2)
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
14 7.60 4.06 3.54 6.57 17.0 11.1 28.1 10.9 22.2 21.7
15 7.60 4.06 3.54 6.57 18.0 12.1 30.1 10.9 24.2 23.6
16 7.60 4.06 3.54 6.57 18.0 12.1 30.1 10.9 24.2 23.6
18 7.60 4.06 3.54 6.57 19.0 13.1 32.1 11.5 26.2 25.6
20 7.60 4.06 3.54 6.57 20.0 14.1 34.1 11.5 28.2 25.6
24 7.60 4.06 3.54 6.57 22.1 16.2 38.3 15.8 32.3 30.7
28 7.60 4.06 3.54 6.57 26.1 20.1 46.2 23.2 40.3 35.8
30 7.60 4.06 3.54 6.57 26.1 20.1 46.2 24.6 40.3 38.4
32 7.60 4.06 3.54 6.57 26.9 21.0 47.9 25.5 42.0 40.9
36 7.60 4.06 3.54 6.57 29.9 24.0 53.9 30.9 48.0 46.0
40 7.60 4.06 3.54 6.57 32.9 27.0 59.9 33.9 54.0 51.2
42 7.60 4.06 3.54 6.57 33.9 28.0 61.9 35.9 56.0 53.7
48 7.60 4.06 3.54 6.57 37.8 31.9 69.7 39.0 63.8 61.4
54 7.60 4.06 3.54 6.57 41.8 35.9 77.7 42.3 71.8 69.1
60 7.60 4.06 3.54 6.57 45.7 39.8 85.5 54.8 79.6 76.8
66 7.60 4.06 3.54 6.57 48.9 43.0 91.9 58.4 86.0 84.4
72 7.60 4.06 3.54 6.57 52.7 46.8 99.5 64.2 93.5 92.1
78 7.60 4.06 3.54 6.57 54.7 48.7 103.4 68.2 97.5 102.3
1) ASME, AWWA; flanges ≤ 24 in only available according to ASME, flanges ≥ 28 in only available according
to AWWA.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.