Endress+Hauser Proline Promag W 400 - Page 48

Proline Promag W 400
48 Endress+Hauser
DN
1)
A B C D E F G H J K
2)
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
1800 199 119 80 167 1383 1188 2571 1632 2376 2340
2000 199 119 80 167 1433 1238 2671 1732 2476 2600
1) EN (DIN), AS; For flanges according to AS, only nominal diameters DN 350, 400, 500 and 600 are
available.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Dimensions in US units
DN
1)
A B C D E F G H J K
2)
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
14 7.83 4.69 3.15 6.57 18.8 11.1 29.9 10.9 22.2 21.7
15 7.83 4.69 3.15 6.57 19.8 12.1 31.9 10.9 24.2 23.6
16 7.83 4.69 3.15 6.57 19.8 12.1 31.9 10.9 24.2 23.6
18 7.83 4.69 3.15 6.57 20.8 13.1 33.9 11.5 26.2 25.6
20 7.83 4.69 3.15 6.57 21.8 14.1 35.9 11.5 28.2 25.6
24 7.83 4.69 3.15 6.57 23.8 16.2 40.0 15.8 32.3 30.7
28 7.83 4.69 3.15 6.57 27.8 20.2 48.0 23.2 40.3 35.8
30 7.83 4.69 3.15 6.57 27.8 20.2 48.0 24.6 40.3 38.4
32 7.83 4.69 3.15 6.57 28.7 21.0 49.7 25.5 42.0 40.9
36 7.83 4.69 3.15 6.57 32.7 24.0 55.7 30.9 48.0 46.0
40 7.83 4.69 3.15 6.57 34.7 27.0 61.7 33.9 54.0 51.2
42 7.83 4.69 3.15 6.57 35.7 28.0 63.7 35.9 56.0 53.7
48 7.83 4.69 3.15 6.57 39.6 31.9 71.5 39.0 63.8 61.4
54 7.83 4.69 3.15 6.57 43.6 35.9 79.5 42.3 71.8 69.1
60 7.83 4.69 3.15 6.57 47.5 39.8 87.3 54.8 79.6 76.8
66 7.83 4.69 3.15 6.57 50.7 43.0 93.7 58.4 86.0 84.4
72 7.83 4.69 3.15 6.57 54.4 46.8 101.2 64.2 93.5 92.1
78 7.83 4.69 3.15 6.57 56.4 48.8 105.2 68.2 97.5 102.3
1) ASME, AWWA; flanges ≤ 24 in only available according to ASME, flanges ≥ 28 in only available according
to AWWA.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.