Endress+Hauser Proline Promag W 400 - Page 57

Proline Promag W 400
Endress+Hauser 57
DN
1)
A B C D E F G
2)
[in] [in] [in] [in] [in] [in] [in] [in]
10 5.35 12.7 8.07 20.8 15.8 6.14 17.7
12 5.35 13.7 9.06 22.8 18.1 6.54 19.7
1) ASME
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Order code for "Sensor option", option CA…CE "Corrosion protection" with DN 25 to 300 (1 to 12")
Option Description
CA IP66/67, Type 4X, fully welded; corrosion protection EN ISO 12944 C5-M
CB IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 C5-M
CC IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 C5-M
CD Buried IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 Im2/3
CE Buried IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 Im2/3
D
A
E
B
C
A0020399
Dimensions in SI units
DN A B E
[mm] [mm] [mm] [mm]
25 112 189 200
32 112 189 200
40 112 189 200
50 112 189 200
65 112 202 200
80 112 207 200
100 112 219 250
125 112 232 250
150 112 254 300
200 112 279 350
250 112 313 450
300 112 338 500