Endress+Hauser Proline Promag W 400 - Page 61

Proline Promag W 400
Endress+Hauser 61
Dimensions in US units
DN
1)
A B C D E F G
2)
[in] [in] [in] [in] [in] [in] [in] [in]
14 5.35 16.0 11.1 29.3 22.2 10.9 21.7
15 5.35 17.0 12.1 31.3 24.2 10.9 23.6
16 5.35 17.0 12.1 31.3 24.2 10.9 23.6
18 5.35 18.0 13.1 33.3 26.2 11.5 25.6
20 5.35 19.0 14.1 35.3 28.2 11.5 25.6
24 5.35 21.1 16.2 39.4 32.3 15.8 30.7
28 5.35 25.1 20.1 45.2 40.3 23.2 35.8
30 5.35 25.1 20.1 45.2 40.3 24.6 38.4
32 5.35 25.9 21.0 46.9 42.0 25.5 40.9
36 5.35 28.9 24.0 52.9 48.0 30.9 46.0
40 5.35 31.9 27.0 58.9 54.0 33.9 51.2
42 5.35 32.9 28.0 60.9 56.0 35.9 53.7
48 5.35 36.8 31.9 68.7 63.8 39.0 61.4
54 5.35 40.8 35.9 76.7 71.8 42.3 69.1
60 5.35 44.7 39.8 84.5 79.6 54.8 76.8
66 5.35 47.9 43.0 91.0 86.0 58.4 84.4
72 5.35 51.7 46.8 98.4 93.5 64.2 92.1
78 5.35 53.6 48.7 102.4 97.5 68.2 102.3
1) ASME, AWWA; flanges ≤ 24 in only available according to ASME, flanges ≥ 28 in only available according to AWWA.
2) The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
Order code for "Design", option A "Insertion length short" with DN 350 to 2000 (14 to 78")
D
F
E
B
C
A
A0017284