Endress+Hauser Proline Promag W 400 - Measuring Device Configuration

Proline Promag W 400
76 Endress+Hauser
Nominal
diameter
EN (DIN) ASME, AWWA AS
[mm] [in] Pressure
rating
[kg] Pressure
rating
[kg] Pressure
rating
[kg] Pressure
rating
[kg] Pressure
rating
[kg] Pressure
rating
[kg]
1 000 40 PN 6 359 PN 10 468 PN 16 563 Class D 587 PN 16 759 Table E 761
1 050 42 PN 6 – PN 10 – PN 16 – Class D 670 PN 16 – Table E –
1 200 48 PN 6 529 PN 10 717 PN 16 840 Class D 901 PN 16 1 219 Table E 1 237
– 54 PN 6 – PN 10 – PN 16 – Class D 1 273 PN 16 – Table E –
1 400 – PN 6 784 PN 10 1 114 PN 16 1200 Class D – PN 16 – Table E –
– 60 PN 6 – PN 10 – PN 16 – Class D 1 594 PN 16 – Table E –
1 600 – PN 6 1 058 PN 10 1 624 PN 16 1841 Class D – PN 16 – Table E –
1 650 66 PN 6 – PN 10 – PN 16 – Class D 2 131 PN 16 – Table E –
1 800 72 PN 6 1 418 PN 10 2 107 PN 16 2353 Class D 2 568 PN 16 – Table E –
2 000 78 PN 6 1 877 PN 10 2 630 PN 16 2925 Class D 3 113 PN 16 – Table E –
Order code for "Calibration flow", options H and K, or order code "Sensor option", option CA "Corrosion
protection" (IP66/67, Type 4X, fully welded; corrosion protection EN ISO 12944 C5-M) with DN 25 to
300 (1 to 12")
Nominal diameter EN (DIN), AS
1)
ASME JIS
[mm] [in] Pressure rating [kg] Pressure rating [kg] Pressure rating [kg]
25 1 PN 40 6.5 Class 150 6 10K 6.5
32 – PN 40 8 Class 150 – 10K 7.5
40 1 ½ PN 40 8.5 Class 150 7 10K 7.5
50 2 PN 40 10 Class 150 9 10K 9
65 – PN 16 11 Class 150 – 10K 10
80 3 PN 16 13 Class 150 13 10K 11
100 4 PN 16 15 Class 150 17 10K 13
125 – PN 16 20 Class 150 – 10K 18
150 6 PN 16 25 Class 150 26 10K 23
200 8 PN 10 36 Class 150 42 10K 32
250 10 PN 10 49 Class 150 59 10K 48
300 12 PN 10 58 Class 150 84 10K 55
1) For flanges according to AS, DN 65 and 125 are not available.
Weight in US units
Nominal diameter ASME, AWWA
[mm] [in] Pressure rating [lbs]
25 1 Class 150 11
40 1 ½ Class 150 15
50 2 Class 150 20
80 3 Class 150 26
100 4 Class 150 31
150 6 Class 150 53
200 8 Class 150 95