Endress+Hauser Proline Promag W 400 - Page 80

Proline Promag W 400
80 Endress+Hauser
Compact and remote versions and sensor connection housing
Cable entry/cable gland Material
Cable gland M20 × 1.5 Plastic
Remote version: cable gland M20 × 1.5
Option of reinforced connecting cable
• Sensor connection housing:
Nickel-plated brass
• Transmitter wall-mount housing:
Plastic
Adapter for cable entry with internal thread G ½" or
NPT ½"
Nickel-plated brass
Device plug
Electrical connection Material
Plug M12x1 • Socket: Stainless steel 1.4404 (316L)
• Contact housing: Polyamide
• Contacts: Gold-plated brass
Connecting cable for remote version
Electrode and coil current cable
• Standard cable: PVC cable with copper shield
• Reinforced cable: PVC cable with copper shield and additional steel wire braided jacket
Sensor housing
• DN 25 to 300 (1 to 12"): aluminum coated AlSi10Mg
• DN 50 to 300 (2 to 12"): carbon steel with protective varnish (IP68)
• DN 350 to 2000 (14 to 78"): carbon steel with protective varnish
Sensor connection housing
• Standard: aluminum coated AlSi10Mg (IP66/67)
• Optional:
– Polycarbonate for IP68 with DN 50 to 300 (2 to 12")
– Polycarbonate for order code "Sensor option", option CA…CE "Corrosion protection" with DN 350
to 2000 (14 to 78")
Sensor cable entries
Order code for "Housing", option N "Remote, polycarbonate" or option P "Remote, coated aluminum"
The various cable entries are suitable for hazardous and non-hazardous areas.
Electrical connection Material
Cable gland M20 × 1.5 Nickel-plated brass
Plastic
1)
Thread G ½"
via adapter
Nickel-plated brass
Thread NPT ½"
via adapter
Nickel-plated brass
1) Only DN 50 to 300 (2 to 12"), fully welded (for sensor option CA…CE)