Endress+Hauser Proline Promass E 100 - Page 64

Proline Promass E 100
64 Endress+Hauser
Threaded couplings
Thread DIN 11851, DIN11864-1, SMS 1145
L
A
B
A0015628
Length tolerance for dimension L in mm:
+1.5 / –2.0
Thread DIN 11851, for pipe according to DIN11866, series A
1.4404 (316/316L)
Order code for "Process connection", option FMW
DN
[mm]
A
[in]
B
[mm]
L
[mm]
8 Rd 34 × ¹⁄₈ 16 229
15 Rd 34 × ¹⁄₈ 16 273
25 Rd 52 × ¹⁄₆ 26 324
40 Rd 65 × ¹⁄₆ 38 456
50 Rd 78 × ¹⁄₆ 50 562
80 Rd 110 × ¹⁄₄ 81 671
3-A version available: order code for "Additional approval", option LP in conjunction with
Ra ≤ 0.8 µm: Order code for "Measuring tube material", option SB
Ra ≤
0.4 µm: Order code for "Measuring tube material", option SC
Thread DIN11864-1 Form A, for pipe according to DIN11866, series A
1.4404 (316/316L)
Order code for "Process connection", option FLW
DN
[mm]
A
[in]
B
[mm]
L
[mm]
8 Rd 28 × ¹⁄₈ 10 229
15 Rd 34 × ¹⁄₈ 16 273
25 Rd 52 × ¹⁄₆ 26 324
40 Rd 65 × ¹⁄₆ 38 456
50 Rd 78 × ¹⁄₆ 50 562
80 Rd 110 × ¹⁄₄ 81 671
3-A version available: order code for "Additional approval", option LP in conjunction with
Ra ≤ 0.8 µm: Order code for "Measuring tube material", option SB
Ra ≤
0.4 µm: Order code for "Measuring tube material", option SC
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru