Endress+Hauser Proline Promass E 100 - Service Interface

Proline Promass E 100
Endress+Hauser 81
Star topology
31 2
4 4 4
A0026545
 40 Options for remote operation via PROFINET network: star topology
1
Automation system, e.g. Simatic S7 (Siemens)
2 Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or
computer with operating tool (e.g. FieldCare, DeviceCare, SIMATIC PDM) with COM DTM "CDI Communication
TCP/IP"
3 Switch, e.g. Scalance X204 (Siemens)
4 Measuring device
Service interface Via service interface (CDI-RJ45)
This communication interface is present in the following device version:
•
Order code for "Output", option B
: 4-20 mA HART, pulse/frequency/switch output
•
Order code for "Output", option L: PROFIBUS DP
• Order code for "Output", option N: EtherNet/IP
• Order code for "Output", option R: PROFINET
HART
1
2
3
A0016926
 41 Connection for the order code for "Output", option B: 4-20 mA HART, pulse/frequency/switch output
1
Service interface (CDI -RJ45) of the measuring device with access to the integrated Web server
2 Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or with
"FieldCare" operating tool with COM DTM "CDI Communication TCP/IP"
3 Standard Ethernet connecting cable with RJ45 plug
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru