Promass 40
2 Endress+Hauser
Promass 40 brief operating instructions
These brief operating instructions show you how to configure your measuring device
quickly and easily:
Safety instructions Page 5
Installation Page 9
Wiring Page 17
Switching on the measuring device Page 27
Display elements Page 23
Customer specific configuration Page 25
Complex measuring operations necessitate additional functions that you can
configure as necessary with the aid of the function matrix, and customise to suit
your process parameters.
Note:
All functions are described in detail, as is the function matrix itself, in the
“Description of Device Functions” manual, which is a separate part of this
Operating Instruction.
Trouble-shooting Page 35 ff.
Always start trouble-shooting with the checklist on Page 35, if faults occur after
start-up or during operation. The routine takes you directly to the cause of the
problem and the appropriate remedial measures.
Returning devices
If you return a measuring device to Endress+Hauser for repair or calibration, you
must enclose the duly completed “Safety regulation” form with the device. You
will find a preprinted blank of the “Safety regulation” form at the back of this
manual.
To Next Page
Loading...
