Promass 40 8 Accessories
Endress+Hauser 33
8 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are avail-
able for the transmitter and the sensor. The E+H service organisation can provide
detailed information on the order codes of your choice.
Accessory Description Ordering code
Transmitter
Promass 40
Transmitter for replacement or for stock. Use
the order code to define the following specifi-
cations:
– Approvals
– Degree of protection / version
– Cable entries
– Display / power supply / operation
– Software
– Outputs / inputs
40XXX
− XXXXX * * * * * *
HART Communicator
DXR 275 handheld
terminal
Handheld terminal for remote parameterisa-
tion and for obtaining measured values via the
current output HART (4...20 mA).
Contact your E+H representative for more
information.
DXR275
− * * * * * *
Applicator ™ Software for selecting and configuring flow-
meters.
Applicator™ can be downloaded from the
Internet or ordered on CD-ROM for installation
on a local PC.
Contact your E+H representative for more
information.
DKA40
− *
FieldTool ™ Configuration and service software for flow-
meters in the field:
– Commissioning, maintenance analysis
– Configuring flowmeters
– Service functions
– Visualisation of process data
– Trouble-shooting
– Controlling the “FieldCheck™” tester/simu-
lator
Contact your E+H representative for more
information.
DXS10
− * * * * *
FieldCheck ™ Tester/simulator for testing flowmeters in the
field.
When used in conjunction with the “Field-
Tool™” software package, test results can be
imported into a database, printed and used
for official certification.
Contact your E+H representative for more
information.
DXC10
− * *
To Next Page
Loading...
