10 Technical data Promass 40
58 Endress+Hauser
10.1.12 Certificates and approvals
Ex Approvals Information presently available in Ex versions (ATEX, FM, CSA) can be supplied by your
E+H Sales Centre on request. All explosion protection data are given in separate
documentation that you can order as necessary.
Sanitary compatibility 3A authorization
CE mark The measuring system is in conformity with the statutory requirements of the EC Direc-
tives. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
Other standards and
guidelines
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
EN 61326 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
NAMUR NE 21:
Association for Standards for Control and Regulation in the Chemical Industry
10.1.13 Ordering information
The E+H service organisation can provide detailed ordering information and information
on the order codes on request.
10.1.14 Accessories
There are no accessories for transmitter and sensor.
10.1.15 Documentation
System Information Promass 40 E (SI 033D/06/en)
Technical Information Promass 40 (TI 055D/06/en)
Description of Device Functions Promass 40 (BA 062D/06/en)
Supplementary documentation on Ex-ratings: ATEX, FM, CSA
To Next Page
Loading...
