Endress+Hauser Promass 40 - Identification; Device Designation; Transmitter Nameplate

Promass 40 2 Identification
Endress+Hauser 7
2 Identification
2.1 Device designation
The “Promass 40” flow measuring system consists of the following components:
• Promass 40 transmitter
• Promass E sensor
2.1.1 Nameplate of the transmitter
Fig. 1: Nameplate specifications for the “Promass 40” transmitter (example)
1 Ordering code/serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Power supply / frequency: 16...62 V DC / 20...55 V AC / 50...60 Hz
Power consumption: 15 VA / W
3 Available inputs / outputs:
I-OUT (HART): with current output (HART)
f-OUT: with pulse/frequency output
STATUS-IN: with status input (auxiliary input)
STATUS-OUT: with status output (switching output)
4 Reserved for information on special products
5 Ambient temperature range
6 Degree of protection
F-40xxxxxx-18-06-xx-xx-000