Endress+Hauser Solicap M FTI56 - Installation; Quick Installation Guide

Solicap M FTI55, FTI56 Installation
Endress+Hauser 15
3 Installation
!
Note!
All dimensions in mm.
3.1 Quick installation guide
BA300Fxx019
1.) Screw in the device
2. a) Release the securing screw in the housing until the housing rotates easily.
2. b) Align the housing as required.
2. c) Tighten the securing screw (< 1 Nm) until the housing can no longer be turned.
3.2 Incoming acceptance, transport, storage
3.2.1 Incoming acceptance
Check the packaging and the contents for damage.
Check the shipment, make sure nothing is missing and that the scope of supply matches your order.
3.2.2 Storage
Pack the device so that is protected against impact for storage and transport. The original packaging
provides optimum protection here.
The permitted storage temperature is –50°C to +85°C.
12
a2.
1.
... 270°
b
1
2
c
1
2